1996 Link-Belt HTC835 Hydraulic Truck Crane; CranesList ID: 509,

• 101’ 4-Section Boom with Auxiliary Lifting Sheave
• 29’ Swing-away Jib with 2° offset - (Jib has one bent cord),
• 21' stowable A- frame. Attaches to fly only. Can be offset 5°,17.5° and 30°,
• Main and *Auxiliary Winches with 5/8" wire rope - *Seller-Vendor never used the 2nd winch so they removed the cable from it several years ago,
• Load Moment Indicator with Anti-Two Block,
• Hook Block,
• Hook Ball, 
• 8’ Wide Link-Belt Carrier With 6 x 4 Drive,
• Cummins Diesel Engine,  
• Fuller Roadranger RT-6613; 13 speeds forward, 3 reverse Transmission - AS PER LINK-BELT SPECIFICATIONS & SUBJECT TO FINAL CONFIRMATION,
• Front Tires: 16.5 x 22.5 (16 PR) transport type tubeless,
• Rear Tires: 10.0 x 20.0 (12 PR) transport type with tube,
• Power hydraulic, double box, single beam outriggers, front and rear. Vertical jack cylinders, each equipped with integral holding valve. Beams extend to 18' centerline-to-centerline and retract to within 8' overall width. Equipped with stowable 19" square lightweight floats. Controls and sight level bubble located in upperstructure cab,
• 5th Front Outrigger,
• Crane was was inspected about a year ago by Crane Sales And Service, 

http://www.CranesList.com

LOCATED IN KANSAS!