Features

Overview

• Working Height 45.33 ft (13.72 m)


• Height to Bottom of Platform 40.33 ft (12.19 m)


• Horizontal Reach 30.17 ft (9.14 m)


• Stowed Travel Height 10.5 ft (3.05 m)


• Platform Capacity 600 lbs (272.15 kg)


• Insulated or Non-insulated: Insulated


• Material Handling: No

Specifications

HYDRAULIC SYSTEM

• Hydraulic Controls: Full Hydraulic


• Operating Pressure 3000 psi (210.92 kg/cm²)


• Flow Rate 6 gpm (22.71 lpm)


• Filtration10 micron return | 100 mesh suction


• System Type: Open Center


• Power Source: PTO Pump

BOOM

• Lower Boom Articulation 0 to 87°


• Inner/Outer Boom Articulation -25° to 85°


• Inner Boom Extension 103 in (2.62 m)


• Upper Boom Insulation Gap 46 in (1.17 m)


• Lower Boom Insulation Gap 12 in (0.3 m)


• Lower Boom Lift Eye Capacity 1000 lbs (453.59 m)


• Boom Rotation: Continuous

Included Options

132” long x 40” high x 94” wide service body including the following:
• 30 inch tread plate platform extension
• LED lighting package installed in tail shelf with additional cutouts for strobe lights
• Cable access step at rear and side access.
• Two (2) chrome grab handles at side access and two (2) pool type grab handles for rear tail shelf.
• Wheel chock storage with pendulum retainers and outrigger pad holders.
• Master door lock hook and loop system on each door with two (2) spring loaded door handles. Excludes 1st vertical curbside
• Grey Zolatone paint on the interior of compartments.
• 40” High Street side compartments as follows
• 1st Vertical:
Two (2) adjustable shelves with dividers and cutout for outrigger
• 2nd Vertical:
Two (2) adjustable shelves with dividers
• Horizontal:
One (1) removable shelf with dividers
• Rear Vertical:
Two (2) adjustable shelves with dividers
• Hot stick shelf with rear access door.
• 40” High Curbside compartments as follows
• 1st Vertical:
Two (2) adjustable shelves with dividers and cutout for outrigger
• 2nd Vertical:
Gripstrut access steps to bed area with removable composite side gate.
• Horizontal:
One (1) adjustable shelf with dividers
• Rear Vertical:
Five (5) fixed material hooks 1-3-1 Installation to include the following:
• Install VERSALIFT VST-40-I, mounting hardware, PTO and pump.
• Install and paint service body and accessories.
• Install combo pintle hitch, D rings and 7 prong trailer connector.
• Install two (2) amber strobe lights in tail shelf and two (2) strobe lights in front grill.
• Install grounding kit, park brake interlock system, back up alarm and mud flaps.
• Supply outrigger pads, wheel chocks, fire extinguisher, and 3 piece triangle reflector kit.
• Test ride completed unit for one (1) hour. Test and certify per ANSI A92.2